|
Sun Shade Panel is manufactured from quality coil stock of either pre-painted aluminium alloy or Bluescope steel. The Sun Shade Panel is designed to provide an effective solution in shielding building occupants from direct solar radiation. It can be applied on office buildings, universities, schools, hospitals and etc.
Product Specification
|
STRIP CEILING OM3 |
DESCRIPTION |
|
Profile and Material Available |
· OM3A - Aluminium c/w polyester paint finish
· OM3B – PrimaMajuTM steel/ Clean Colorbond® steel
|
|
Thickness of Material
· Aluminium c/w polyester paint finish
· PrimaMajuTM steel/ Clean Colorbond® steel
|
· 0.50mm TCT (Total Coated Thickness)
· 0.38mm / 0.48mm TCT |
|
Panel Effective Width and Depth
· OM3 A/B 100
· OM3 A/B 150
· OM3 A/B 85S
· OM3 A/B 135S
|
· 100mm width x 15mm depth
· 150mm width x 15mm depth
· 85mm width x 15mm depth
· 135mm width x 15mm depth |
|
Carrier
· OM3 A/B 100/150
· OM3 A/B 85S/135S
|
· MB 3
· MB 3-85S / 135S |
|
Method of Installation
|
Clip-on |
|
Length
|
Made to order with minimum of 2 meter. Recommended optimum length of 6 meter
|
|
Available Colours
|
Gold / White / Silver
*Other colours available subject to availability of stock
|
Carries
|
VERTICAL APPLICATION |
HORIZONTAL APPLICATION |
|
Vertical sun shade panels can be constructed using both carries at 45 degrees (VTX-45) and 25 degrees (VTX-25).
VTX-45: With the use of VTX-45, the window is partly covered and has a more or less Closed appearance.
VTX-25: By using the carrier VTX-25, the panels are less inclined, thus allowing more visual contact.
Note: Standard length of carries is 2.44 metre.
|
The horizontal sun shade panels are constructed using the carrier HTX-65.
HTX-65: With the horizontal sun shade, very little horizontal light condition inside the building remains excellent.
|
Installation Method
Vertical Sun Shade Panel
Horizontal Sun Shade Panel
|
