Product Description

This tile effect metal roofing profile reflects subtle charm and beauty and is the latest development in profile roofing technology. Euro is roll-formed from grade G300 steel.

Applications

Its efficient design presents an attractive and reliable waterproof roofing system ideal for all types of residential and commercial projects such as schools, condominiums, bungalows, shop offices and etc.

Benefits

• Easy to look after

This profile is manufactured from high strength steel and coated with corrosion resisting material, ensuring long life span and minimal maintenance.

• Easy to Handle and Install

Euro sheets of the appropriate lengths can be put together in a short time as the installation is easy and does not require any special tools or techniques.

• Manufactured to Length

The Euro profile can be manufactured upon request to the desired lengths.

• Light Weight

As the Euro is made from high tensile steel, it is strong and much lighter (approximately 4kg/m²) than the conventional concrete tiles. This means that lighter roof structures can be applied, thus leading to

real savings in the total cost of the roofing system.

Materials Available

• Clean Colorbond^® steel
• PrimaMaju^TM steel

SECTIONAL PROFILE

Dimensions                                                      Tolerance

Effective cover         : 780mm                              Thickness for material  : + 0.03mm

Standard step length : 350mm                              Effective width            : + 3mm

Minimum roof pitch  : 8°                                      Finishing length            : + 5mm         

TECHNICAL DATA

AVAILABLE THICKNESS

Base Metal Thickness (mm)	Total Coated Thickness (mm)	Weight (kg/m2)	Steel Grade	Min. Yield Strength (MPa)
0.35	0.40	3.00	AS1397	G300
0.42	0.48	3.50	AS1397	G300
0.48	0.55	4.20	AS1397	G300

Other thicknesses are subject upon stock availability and time delivery

ROOF BATTENS

Roof battens for EURO must be fitted as shown in the daigram.

Note: The first batten spacing of 310mm is measured from the outside of the bargeboard, all subsequent batten spacing are at 350mm.

ROOF SHEET FASTENING Self drilling screws are recommended for fitting the roof sheets.

These are always placed in the troughs in the sheets. Firm fixing is required so that the roof sheets rest tightly against their base.

LAYING DIRECTION